Materiaal | maagdelijk silicone |
---|---|
Kleur | Translucent, grijs, zwart, blauw |
Oppervlakte | Vlot, Mat, Indrukstof |
Strengte voor trekken | 7.5-12Mpa |
Hardheid | 40-60 kust A |
Materiaal | maagdelijk silicone |
---|---|
Kleur | Translucent, grijs, zwart, blauw |
Oppervlakte | Vlot, Mat, Indrukstof |
Strengte voor trekken | 7.5-12Mpa |
Hardheid | 10-75 Strand A |
Goederen | het blad van het siliconeschuim |
---|---|
Naam | Dichte Cel 1.5mm de Stroken van het Siliconeschuim, de Strook van de Siliconespons |
cel | Dichte Cel |
Oppervlakte | Indrukstof |
Kwaliteit | Industriële kwaliteit |
Oppervlakte | vlot/maak glad, |
---|---|
Tensible Strengh | 7-12Mpa |
Hardheid | 40,50,60,70,80+/-5shore A |
Verlenging | 350%-720% |
Dichtheid | 1.25g/cm3 |
Breedte | 1m-2m |
---|---|
Naam | silicone rubberblad |
Zuurresistentie | - Goed. |
Kleur | Doorzichtig, Grijs, Blauw |
De kracht van tranen | ≥42N/mm |
Materiaal | siliconespons |
---|---|
Kleur | rood, zwart, wit, grijs |
cel | Dichte Cel |
Hardheid | 10-40shore A |
Treksterkte | 100-200psi |
Breedte | 1m-2m |
---|---|
Compressie-set | ≤25% |
Lange | 1m20m |
Materiaal | Rubber |
Olieweerstand | - Goed. |
Materiaal | maagdelijk silicone |
---|---|
Kleur | Translucent, grijs, zwart, blauw |
Oppervlakte | Vlot, Mat, Indrukstof |
Strengte voor trekken | 7.5-12Mpa |
Hardheid | 40-60 kust A |
Materiaal | maagdelijk silicone |
---|---|
Kleur | Grijz, zwart, blauw |
Oppervlakte | Vlot, Mat, Indrukstof |
Strengte voor trekken | 7.5-12Mpa |
Hardheid | 60-70shore A |
Materiaal | NR, NBR, SBR, EPDM, neopreen, FKM, silicone, PTFE en staal materiële enz. |
---|---|
Type | rubberpakking, O-ring, x-ring, de ring van ER, va ring, versus ring, V- verpakking 7in1, tdp pistona |
Kwaliteit | industriële rang, voedselrang, medische rang |
Kleur | zwarte, bruine, rode, grijze, witte enz. |
Oppervlakte | Glanz |